How to use

  • 100%
  • 30% 50% 90% H&F

1단계

  • [“Stretching” the back side of the sticker]

    Face the back side of the sticker upwards and while placing your middle fingers on the opposite side of the area where ① is printed, pull it sideways.

     
  • [“Stretching” the back side of the sticker]

    This time, while placing your middle fingers on the opposite side of the area where ② is printed, pull it sideways.

     

2단계

  • [Folding the release paper]

    Fold the areas where ① is printed (top and bottom sides) perpendicularly.

     
  • [Folding the release paper]

    Fold the areas where ② is printed (left and right sides) perpendicularly.
    Now, a frame is created so you can place the cigarette pack at the right place.

     

3단계

  • [Placing the front side of the cigarette pack on the sticker]

    Insert the cigarette pack, front side facing down, between the frames.

     
  • [Releasing the release paper]

    Remove all the release papers where ①, ②, ③, and ④ are printed.

     

4단계

  • [Sticking the cigarette pack to the sticker]

    Using a flat surface, stick the side of the cigarette pack to the sticker.
    When doing so, apply pressure on the surface using the edge (black arrows in the figure) of the cigarette pack.

     
  • [Sticking the pack to the sticker]

    Stick the left and right side of the cigarette pack to the sticker.

     
  • [Sticking the pack to the sticker]

    Apply the ‘wings’ of the sticker to the cigarette pack.

     

5단계

  • [Sticking the pack to the sticker]

    Similarly, using a flat surface, stick the cigarette pack (top and bottom side) to the sticker.

     
  • [Sticking the pack to the sticker]

    Apply the ‘wings’ of the top and bottom side of the sticker to the cigarette pack.

     

6단계

  • [Sticking the pack to the sticker]

    Finally, remove the remaining release paper and stick the back side of the pack to the sticker.

     

7단계

  • Completed!

     
  • Open!

     

1단계

  • [“Stretching” the back side of the sticker]

    Face the backside of the sticker upwards and while placing your middle fingers in the center, pull it sideways.

     

2단계

  • [Folding the release paper]

    When applying the sticker on a slim cigarette pack, fold the release paper around the two inner dotted lines.
    Now, a frame is created so you can place the cigarette pack at the right place.

     
  • [Folding the release paper]

    When applying the sticker on a slim cigarette pack, fold the release paper around the two outer dotted lines. Now, a frame is created so you can place the cigarette pack at the right place.

     

3단계

  • [Sticking the top side to the sticker]

    Insert the cigarette pack, top side facing down, between the frames.

     
  • [Sticking the top side to the sticker]

    Insert the cigarette pack, top side facing down, between the frames.

     

4단계

  • [Removing the frames]

    Remove both release papers.

     

5단계

  • [Sticking the pack to the sticker]

    Using a flat surface, stick the side of the cigarette pack to the sticker. When doing so, apply pressure on the surface using the edge (black arrows in the figure) of the cigarette pack.

     
  • [Sticking the pack to the sticker]

    If you cannot use a flat surface, gently pull down the sticker and apply it on the pack using your thumb and index finger.

     

6단계

  • Completed!

     
  • Cut!

    Use your thumb nail to cut open the sealed part. Warning: the sealed part will not cut nicely if the pack is empty.

     

7단계

  • Open!